vibe-openscad

tier-1-mug / gpt-6-sol

6 run / 累計 86.3s / 累計 $0.0585

openai gpt 6 sol bare

bare (provider default effort)

run detail →
render
bare render of tier-1-mug
loading STL…
success 11.4s · 168/660t · $0.0069
SCAD (19 lines)
$fn = 96;

difference() {
    union() {
        // カップ本体
        cylinder(d = 80, h = 100);

        // 側面のリング状取手
        translate([52, 0, 50])
            rotate([90, 0, 0])
                rotate_extrude()
                    translate([12, 0, 0])
                        circle(r = 4);
    }

    // 内側をくり抜き、底面を6mm残す
    translate([0, 0, 6])
        cylinder(d = 72, h = 95);
}

prompt

OpenSCAD で、外径 80mm、高さ 100mm、肉厚 4mm のマグカップを作ってください。
底面の厚みは 6mm とし、内側はくり抜いて飲み物を入れられる形状にしてください。
さらに、側面には外径方向に飛び出す半径 12mm の取手(リング状の取手)を付けてください。
取手はカップの中心高さあたりに付け、外周から十分にはみ出して指を通せる形にしてください。

完成したコード全体を ```openscad ... ``` のフェンスで囲んで出力してください。コードのみで、追加の説明は不要です。

variant: effort

low success →
low
6.6s · 168/425t · $0.0046
SCAD (29 lines)
$fn = 96;

outer_radius = 40;
wall_thickness = 4;
bottom_thickness = 6;
cup_height = 100;

handle_radius = 12;
handle_thickness = 4;
handle_center_x = 53;
handle_center_z = cup_height / 2;

union() {
    difference() {
        cylinder(h = cup_height, r = outer_radius);

        translate([0, 0, bottom_thickness])
            cylinder(
                h = cup_height - bottom_thickness + 1,
                r = outer_radius - wall_thickness
            );
    }

    translate([handle_center_x, 0, handle_center_z])
        rotate([90, 0, 0])
            rotate_extrude()
                translate([handle_radius, 0])
                    circle(r = handle_thickness);
}
medium (default) success →
medium
11.4s · 168/660t · $0.0069
SCAD (19 lines)
$fn = 96;

difference() {
    union() {
        // カップ本体
        cylinder(d = 80, h = 100);

        // 側面のリング状取手
        translate([52, 0, 50])
            rotate([90, 0, 0])
                rotate_extrude()
                    translate([12, 0, 0])
                        circle(r = 4);
    }

    // 内側をくり抜き、底面を6mm残す
    translate([0, 0, 6])
        cylinder(d = 72, h = 95);
}
high success →
high
12.2s · 168/866t · $0.0090
SCAD (32 lines)
$fn = 96;

cup_outer_radius = 40;
cup_height = 100;
wall_thickness = 4;
bottom_thickness = 6;

handle_outer_radius = 12;
handle_inner_radius = 8;
handle_thickness = 12;
handle_center_x = 50;
handle_center_z = cup_height / 2;

union() {
    difference() {
        cylinder(h = cup_height, r = cup_outer_radius);

        translate([0, 0, bottom_thickness])
            cylinder(
                h = cup_height - bottom_thickness + 1,
                r = cup_outer_radius - wall_thickness
            );
    }

    translate([handle_center_x, 0, handle_center_z])
        rotate([90, 0, 0])
            linear_extrude(height = handle_thickness, center = true)
                difference() {
                    circle(r = handle_outer_radius);
                    circle(r = handle_inner_radius);
                }
}
max success →
max
26.1s · 168/1789t · $0.0182
SCAD (33 lines)
$fn = 128;

outer_diameter = 80;
cup_height = 100;
wall_thickness = 4;
bottom_thickness = 6;

handle_outer_radius = 12;
handle_inner_radius = 9;
handle_thickness = 8;
handle_center_x = 50;

union() {
    // 上部を開け、底に6mmの厚みを残す
    difference() {
        cylinder(d = outer_diameter, h = cup_height);

        translate([0, 0, bottom_thickness])
            cylinder(
                d = outer_diameter - 2 * wall_thickness,
                h = cup_height - bottom_thickness + 1
            );
    }

    // 側面に接続するリング状の取手
    translate([handle_center_x, 0, cup_height / 2])
        rotate([90, 0, 0])
            linear_extrude(height = handle_thickness, center = true)
                difference() {
                    circle(r = handle_outer_radius);
                    circle(r = handle_inner_radius);
                }
}
xhigh success →
xhigh
18.6s · 168/1249t · $0.0128
SCAD (33 lines)
$fn = 96;

cup_outer_radius = 40;
cup_height = 100;
wall_thickness = 4;
bottom_thickness = 6;

handle_outer_radius = 12;
handle_inner_radius = 9;
handle_depth = 8;
handle_center_x = cup_outer_radius + 9;

union() {
    // 上部が開いたカップ本体
    difference() {
        cylinder(h = cup_height, r = cup_outer_radius);

        translate([0, 0, bottom_thickness])
            cylinder(
                h = cup_height - bottom_thickness + 0.1,
                r = cup_outer_radius - wall_thickness
            );
    }

    // カップの中ほどに付くリング状の取手
    translate([handle_center_x, 0, cup_height / 2])
        rotate([90, 0, 0])
            linear_extrude(height = handle_depth, center = true)
                difference() {
                    circle(r = handle_outer_radius);
                    circle(r = handle_inner_radius);
                }
}