bare-max/gpt-6-sol / tier-1-mug
success tier 1
bare (gpt 6 sol)
render
$fn = 128;
outer_diameter = 80;
cup_height = 100;
wall_thickness = 4;
bottom_thickness = 6;
handle_outer_radius = 12;
handle_inner_radius = 9;
handle_thickness = 8;
handle_center_x = 50;
union() {
// 上部を開け、底に6mmの厚みを残す
difference() {
cylinder(d = outer_diameter, h = cup_height);
translate([0, 0, bottom_thickness])
cylinder(
d = outer_diameter - 2 * wall_thickness,
h = cup_height - bottom_thickness + 1
);
}
// 側面に接続するリング状の取手
translate([handle_center_x, 0, cup_height / 2])
rotate([90, 0, 0])
linear_extrude(height = handle_thickness, center = true)
difference() {
circle(r = handle_outer_radius);
circle(r = handle_inner_radius);
}
} パラメータ (8) —
スライダを動かすと openscad-wasm で再レンダリング
prompt
OpenSCAD で、外径 80mm、高さ 100mm、肉厚 4mm のマグカップを作ってください。 底面の厚みは 6mm とし、内側はくり抜いて飲み物を入れられる形状にしてください。 さらに、側面には外径方向に飛び出す半径 12mm の取手(リング状の取手)を付けてください。 取手はカップの中心高さあたりに付け、外周から十分にはみ出して指を通せる形にしてください。 完成したコード全体を ```openscad ... ``` のフェンスで囲んで出力してください。コードのみで、追加の説明は不要です。