vibe-openscad

tier-2-l-bracket / qwen/qwen3.5-9b

3 run / 累計 879.5s / 累計 $0

qwen/qwen3.5-9b bare

bare (provider default effort)

run detail →
render
no render
render_error 232.4s · 272/18882t 
openscad stl render failed (exit 1): Current top level object is empty.
SCAD (83 lines) 
module lbracket() {
  // L-Bracket Dimensions
  width = 50;    // X axis
  depth_h = 40;  // Y axis (Horizontal)
  height_v = 40; // Z axis (Vertical)
  thickness = 3; // mm
  
  // Inner corner at origin (0,0,0)
  // Horizontal flange extends +Y
  // Vertical flange extends +Z
  // Thickness is centered on the inner plane
  
  union() {
    // Horizontal Flange (XY plane, thickness Z)
    // X: 0 to 50, Y: 0 to 40, Z: -1.5 to 1.5
    translate([0, 0, 0])
      cube([width, depth_h, thickness]);
    
    // Vertical Flange (XZ plane, thickness Y)
    // X: 0 to 50, Z: 0 to 40, Y: -1.5 to 1.5
    translate([0, 0, 0])
      cube([width, thickness, height_v]);
  }
  
  // Remove holes
  difference() {
    // Re-extract shape for hole positioning
    union() {
      translate([0, 0, 0])
        cube([width, depth_h, thickness]);
      translate([0, 0, 0])
        cube([width, thickness, height_v]);
    }
    
    // Hole positions
    // Horizontal Flange: X=25, Y=10, Y=30 (Centered on X-axis)
    // Vertical Flange: X=25, Z=10, Z=30 (Centered on X-axis)
    // Thickness: 3mm, Counterbore depth: 2mm
    
    // Hole parameters
    d_through = 4.5;
    d_counter = 8;
    h_counter = 2;
    
    // Horizontal Flange Holes (Axis Z)
    // Counterbore on outer side (Z=1.5 face) -> Center Z=0.5
    // Through hole centered (Z=0)
    // Y positions: 10, 30
    // X position: 25
    for (y = [10, 30]) {
      translate([25, y, 0]) {
        // Counterbore
        translate([0, 0, 0.5])
          cylinder(d = d_counter, h = h_counter, $fn=64);
        // Through Hole
        translate([0, 0, 0])
          cylinder(d = d_through, h = thickness, $fn=64);
      }
    }
    
    // Vertical Flange Holes (Axis Y)
    // Counterbore on outer side (Y=1.5 face) -> Center Y=0.5
    // Through hole centered (Y=0)
    // Z positions: 10, 30
    // X position: 25
    for (z = [10, 30]) {
      translate([25, 0, z]) {
        // Counterbore
        translate([0, 0.5, 0])
          cylinder(d = d_counter, h = h_counter, $fn=64);
        // Through Hole
        translate([0, 0, 0])
          cylinder(d = d_through, h = thickness, $fn=64);
      }
    }
  }
}

// Display
module lbracket_view() {
  // Rotate for better visualization if needed, but keeping inner corner at origin
  // lbracket();
}

prompt

OpenSCAD で、L 字に折れた金具(L-bracket)を作ってください。

形状:
- 水平面と垂直面の 2 つのフランジが直角に繋がっている
- 水平面は 50mm × 40mm(幅 × 奥行き)
- 垂直面は 50mm × 40mm(幅 × 高さ)
- 板厚はどちらも 3mm
- 内側コーナーが原点になるように配置(水平面は +Y 方向、垂直面は +Z 方向に伸びる)

皿穴(countersunk holes):
- 各面に 2 個ずつ、合計 4 個
- M4 ねじ用(貫通穴 Φ4.5mm + 皿座面 Φ8mm × 深さ 2mm)
- 各面の中心線上で、面の縁から 10mm 内側、左右対称に 2 個並べる
- 皿座面は外側(ボルト頭が当たる側)に向ける

完成したコード全体を ```openscad ... ``` のフェンスで囲んで出力してください。コードのみで、追加の説明は不要です。

iteration: iter-png

i1 success →
iter 1
11.8s · 1177/1259t
diff vs bare: +10/-33 
  module lbracket() {
    // L-Bracket Dimensions
    width = 50;    // X axis
    depth_h = 40;  // Y axis (Horizontal)
    height_v = 40; // Z axis (Vertical)
    thickness = 3; // mm
    
-   // Inner corner at origin (0,0,0)
-   // Horizontal flange extends +Y
-   // Vertical flange extends +Z
-   // Thickness is centered on the inner plane
-   
    union() {
-     // Horizontal Flange (XY plane, thickness Z)
-     // X: 0 to 50, Y: 0 to 40, Z: -1.5 to 1.5
+     // Horizontal Flange
      translate([0, 0, 0])
        cube([width, depth_h, thickness]);
      
-     // Vertical Flange (XZ plane, thickness Y)
-     // X: 0 to 50, Z: 0 to 40, Y: -1.5 to 1.5
+     // Vertical Flange
      translate([0, 0, 0])
        cube([width, thickness, height_v]);
    }
    
    // Remove holes
    difference() {
      // Re-extract shape for hole positioning
      union() {
        translate([0, 0, 0])
          cube([width, depth_h, thickness]);
        translate([0, 0, 0])
          cube([width, thickness, height_v]);
      }
      
-     // Hole positions
-     // Horizontal Flange: X=25, Y=10, Y=30 (Centered on X-axis)
-     // Vertical Flange: X=25, Z=10, Z=30 (Centered on X-axis)
-     // Thickness: 3mm, Counterbore depth: 2mm
-     
      // Hole parameters
      d_through = 4.5;
      d_counter = 8;
      h_counter = 2;
      
-     // Horizontal Flange Holes (Axis Z)
-     // Counterbore on outer side (Z=1.5 face) -> Center Z=0.5
-     // Through hole centered (Z=0)
-     // Y positions: 10, 30
-     // X position: 25
+     // Horizontal Flange Holes
      for (y = [10, 30]) {
        translate([25, y, 0]) {
-         // Counterbore
-         translate([0, 0, 0.5])
+         // Counterbore on outer side (Z positive face)
+         translate([0, 0, 1])
            cylinder(d = d_counter, h = h_counter, $fn=64);
          // Through Hole
          translate([0, 0, 0])
            cylinder(d = d_through, h = thickness, $fn=64);
        }
      }
      
-     // Vertical Flange Holes (Axis Y)
-     // Counterbore on outer side (Y=1.5 face) -> Center Y=0.5
-     // Through hole centered (Y=0)
-     // Z positions: 10, 30
-     // X position: 25
+     // Vertical Flange Holes
      for (z = [10, 30]) {
        translate([25, 0, z]) {
-         // Counterbore
-         translate([0, 0.5, 0])
+         // Counterbore on outer side (Y positive face)
+         translate([0, 1, 0])
            cylinder(d = d_counter, h = h_counter, $fn=64);
          // Through Hole
          translate([0, 0, 0])
            cylinder(d = d_through, h = thickness, $fn=64);
        }
      }
    }
  }
  
- // Display
- module lbracket_view() {
-   // Rotate for better visualization if needed, but keeping inner corner at origin
-   // lbracket();
- }
+ // Main - call module at top level
+ lbracket();
SCAD (60 lines) 
module lbracket() {
  // L-Bracket Dimensions
  width = 50;    // X axis
  depth_h = 40;  // Y axis (Horizontal)
  height_v = 40; // Z axis (Vertical)
  thickness = 3; // mm
  
  union() {
    // Horizontal Flange
    translate([0, 0, 0])
      cube([width, depth_h, thickness]);
    
    // Vertical Flange
    translate([0, 0, 0])
      cube([width, thickness, height_v]);
  }
  
  // Remove holes
  difference() {
    // Re-extract shape for hole positioning
    union() {
      translate([0, 0, 0])
        cube([width, depth_h, thickness]);
      translate([0, 0, 0])
        cube([width, thickness, height_v]);
    }
    
    // Hole parameters
    d_through = 4.5;
    d_counter = 8;
    h_counter = 2;
    
    // Horizontal Flange Holes
    for (y = [10, 30]) {
      translate([25, y, 0]) {
        // Counterbore on outer side (Z positive face)
        translate([0, 0, 1])
          cylinder(d = d_counter, h = h_counter, $fn=64);
        // Through Hole
        translate([0, 0, 0])
          cylinder(d = d_through, h = thickness, $fn=64);
      }
    }
    
    // Vertical Flange Holes
    for (z = [10, 30]) {
      translate([25, 0, z]) {
        // Counterbore on outer side (Y positive face)
        translate([0, 1, 0])
          cylinder(d = d_counter, h = h_counter, $fn=64);
        // Through Hole
        translate([0, 0, 0])
          cylinder(d = d_through, h = thickness, $fn=64);
      }
    }
  }
}

// Main - call module at top level
lbracket();
i2 no_code nocode →
no_code
635.4s · 1335/64201t 
model returned empty response (stopReason=length)
SCAD (1 lines)

no SCAD

i3not run
—