bare/gpt-6-astra / tier-1-mug

success tier 1

bare (gpt 6 astra)

render

loading STL…

success 19.9s · 168/790t · $0.0412

SCAD (48 lines)

$fn = 160;

cup_outer_diameter = 80;
cup_height = 100;
wall_thickness = 4;
bottom_thickness = 6;

handle_outer_radius = 12;
handle_ring_thickness = 3;
handle_width = 6;
handle_overlap = 2.5;

cup_outer_radius = cup_outer_diameter / 2;
cup_inner_radius = cup_outer_radius - wall_thickness;
handle_inner_radius = handle_outer_radius - handle_ring_thickness;
handle_center_x = cup_outer_radius
                + handle_outer_radius
                - handle_overlap;

epsilon = 0.1;

union() {
    difference() {
        cylinder(h = cup_height, r = cup_outer_radius);

        translate([0, 0, bottom_thickness])
            cylinder(
                h = cup_height - bottom_thickness + epsilon,
                r = cup_inner_radius
            );
    }

    translate([handle_center_x, 0, cup_height / 2])
        rotate([90, 0, 0])
            difference() {
                cylinder(
                    h = handle_width,
                    r = handle_outer_radius,
                    center = true
                );

                cylinder(
                    h = handle_width + 2 * epsilon,
                    r = handle_inner_radius,
                    center = true
                );
            }
}

```openscad
$fn = 160;

cup_outer_diameter = 80;
cup_height = 100;
wall_thickness = 4;
bottom_thickness = 6;

handle_outer_radius = 12;
handle_ring_thickness = 3;
handle_width = 6;
handle_overlap = 2.5;

cup_outer_radius = cup_outer_diameter / 2;
cup_inner_radius = cup_outer_radius - wall_thickness;
handle_inner_radius = handle_outer_radius - handle_ring_thickness;
handle_center_x = cup_outer_radius
                + handle_outer_radius
                - handle_overlap;

epsilon = 0.1;

union() {
    difference() {
        cylinder(h = cup_height, r = cup_outer_radius);

        translate([0, 0, bottom_thickness])
            cylinder(
                h = cup_height - bottom_thickness + epsilon,
                r = cup_inner_radius
            );
    }

    translate([handle_center_x, 0, cup_height / 2])
        rotate([90, 0, 0])
            difference() {
                cylinder(
                    h = handle_width,
                    r = handle_outer_radius,
                    center = true
                );

                cylinder(
                    h = handle_width + 2 * epsilon,
                    r = handle_inner_radius,
                    center = true
                );
            }
}
```

パラメータ (9) —

cup_outer_diameter cup_height wall_thickness bottom_thickness handle_outer_radius handle_ring_thickness handle_width handle_overlap epsilon

スライダを動かすと openscad-wasm で再レンダリング

runId	`bare_gpt-6-astra-c09a36887547-2026-09-05T10-10-35-217Z`
matrixId	`bare/gpt-6-astra`
signature	`c09a368875477400…`
provider	openai
model	gpt-6-astra
harness	bare
status	success
duration	19.93s (wallclock: load + prompt eval + generation + network)
tokens	168 in / 790 out
wallclock tok/s	39.6 tok/s (end-to-end)
cost	$0.0412
createdAt	2026-09-05T10:10:35.217Z
gitCommit	`d69c2b8ad709`
openscad	OpenSCAD version 2026.04.27

prompt

OpenSCAD で、外径 80mm、高さ 100mm、肉厚 4mm のマグカップを作ってください。
底面の厚みは 6mm とし、内側はくり抜いて飲み物を入れられる形状にしてください。
さらに、側面には外径方向に飛び出す半径 12mm の取手(リング状の取手)を付けてください。
取手はカップの中心高さあたりに付け、外周から十分にはみ出して指を通せる形にしてください。

完成したコード全体を ```openscad ... ``` のフェンスで囲んで出力してください。コードのみで、追加の説明は不要です。

bare/gpt-6-astra / tier-1-mug

meta

prompt