vibe-openscad

bare-max/gpt-6-luna / tier-2-offset-handle-mug

success tier 2

bare (gpt 6 luna)

render
bare render of tier-2-offset-handle-mug
loading STL…
success 153.8s · 273/17480t · $0.0088
SCAD (65 lines)
outer_d = 80;
inner_d = 70;
mug_height = 90;
bottom_thickness = 6;

opening_width = 25;
opening_height = 30;
handle_band = 5;
handle_depth = 10;

opening_radius = opening_height / 2;
opening_arc_center_x = opening_width - opening_radius;

$fn = 128;

module mug_body() {
    difference() {
        cylinder(d = outer_d, h = mug_height);

        translate([0, 0, bottom_thickness])
            cylinder(
                d = inner_d,
                h = mug_height - bottom_thickness + 1
            );
    }
}

module d_profile(radius, left_x, center_x) {
    union() {
        translate([left_x, -radius])
            square([center_x - left_x, 2 * radius]);

        intersection() {
            translate([center_x, 0])
                circle(r = radius);

            translate([center_x, -radius])
                square([radius, 2 * radius]);
        }
    }
}

module handle() {
    translate([outer_d / 2, 0, mug_height / 2])
        rotate([90, 0, 0])
            linear_extrude(height = handle_depth, center = true)
                difference() {
                    d_profile(
                        opening_radius + handle_band,
                        -handle_band,
                        opening_arc_center_x
                    );

                    d_profile(
                        opening_radius,
                        0,
                        opening_arc_center_x
                    );
                }
}

union() {
    mug_body();
    handle();
}
パラメータ (8) —
スライダを動かすと openscad-wasm で再レンダリング

meta

runIdbare-max_gpt-6-luna-bee95c784b0f-2026-10-06T19-34-47-056Z
matrixIdbare-max/gpt-6-luna
signaturebee95c784b0f50c7…
provideropenai
modelgpt-6-luna
harnessbare
statussuccess
duration153.76s (wallclock: load + prompt eval + generation + network)
tokens273 in / 17480 out
wallclock tok/s113.7 tok/s (end-to-end)
cost$0.0088
createdAt2026-10-06T19:34:47.056Z
gitCommitf205f3241c4c
openscadOpenSCAD version 2026.09.23

prompt

OpenSCAD で、向きが指定されたマグカップを作ってください。

本体:
- 外径 80mm、内径 70mm(肉厚 5mm)、高さ 90mm の円筒形マグ
- 底面の厚みは 6mm
- 内側は飲み物を入れられるよう中空

取手(handle):
- マグの **+X 軸方向の側面のみ** に付ける(他の方向には付けない)
- 取手は D 字形状(外側が半円、本体側が直線)で、本体外周にしっかり接続する
- 取手の内側の空間は高さ 30mm × 幅 25mm(指 3 本ぐらい入る)
- 取手はマグの高さ方向の中央付近に付ける
- 本体と取手は確実に union され、マニフォールド(隙間や宙吊りなし)を保つ

完成したコード全体を ```openscad ... ``` のフェンスで囲んで出力してください。コードのみで、追加の説明は不要です。