bare-high/gpt-5.4-nano / tier-2-offset-handle-mug
render_error tier 2
error
openscad stl render failed (exit 1): ERROR: Parser error: syntax error in file ../../../../../tmp/render-WMbUOf/input.scad, line 47 Can't parse file '/tmp/render-WMbUOf/input.scad'!
bare (gpt 5.4 nano)
render
no render
$fn = 96;
// ---------------- Mug parameters ----------------
mug_outer_d = 80;
mug_inner_d = 70; // inner diameter
mug_h = 90;
mug_bottom = 6; // bottom thickness
// ---------------- Handle parameters ----------------
handle_opening_h = 30; // inner space height
handle_opening_w = 25; // inner space width (Y direction)
handle_wall = 6; // used to size outer D and side walls
attach_overlap = 0.5; // ensure overlap with mug for robust union
eps = 0.2;
// Handle will be centered around the mug's height center
z_center = mug_h / 2;
// ---------------- Geometry helpers ----------------
module half_cyl_y(r, ylen, x_center, z_center) {
// Cylinder axis is along Y; D shape is created by keeping only x >= x_center.
intersection() {
translate([x_center, 0, z_center])
rotate([90, 0, 0])
cylinder(r = r, h = ylen, center = true);
translate([x_center, -ylen/2, z_center - r])
cube([r, ylen, 2*r], center = false);
}
}
module d_handle() {
outer_r = handle_opening_h/2 + handle_wall; // outer semicircle radius
inner_r = handle_opening_h/2; // target semicircle radius for inner opening
outer_ylen = handle_opening_w + 2*handle_wall;
inner_ylen = handle_opening_w;
mug_outer_r = mug_outer_d/2;
x_flat_out = mug_outer_r - attach_overlap; // outer D flat face plane
x_flat_in = x_flat_out + handle_wall; // inner cavity flat face plane
outer = half_cyl_y(outer_r, outer_ylen, x_flat_out, z_center);
inner = half_cyl_y(inner_r - eps, inner_ylen - eps, x_flat_in, z_center);
difference() { outer; inner; }
}
module mug_body() {
difference() {
cylinder(d = mug_outer_d, h = mug_h);
// hollow interior
translate([0, 0, mug_bottom])
cylinder(d = mug_inner_d, h = mug_h - mug_bottom + 0.1);
}
}
// ---------------- Assembly ----------------
union() {
mug_body();
// attach only on +X side by construction of the handle (x >= flat face plane)
d_handle();
}prompt
OpenSCAD で、向きが指定されたマグカップを作ってください。 本体: - 外径 80mm、内径 70mm(肉厚 5mm)、高さ 90mm の円筒形マグ - 底面の厚みは 6mm - 内側は飲み物を入れられるよう中空 取手(handle): - マグの **+X 軸方向の側面のみ** に付ける(他の方向には付けない) - 取手は D 字形状(外側が半円、本体側が直線)で、本体外周にしっかり接続する - 取手の内側の空間は高さ 30mm × 幅 25mm(指 3 本ぐらい入る) - 取手はマグの高さ方向の中央付近に付ける - 本体と取手は確実に union され、マニフォールド(隙間や宙吊りなし)を保つ 完成したコード全体を ```openscad ... ``` のフェンスで囲んで出力してください。コードのみで、追加の説明は不要です。