bare-high/gpt-5.4 / tier-2-offset-handle-mug
success tier 2
bare (gpt 5.4)
render
$fn = 128;
mug_od = 80;
mug_id = 70;
mug_h = 90;
bottom_t = 6;
handle_open_w = 25;
handle_open_h = 30;
handle_wall = 5;
handle_depth = 12;
outer_r = mug_od / 2;
inner_r = mug_id / 2;
handle_outer_w = handle_open_w + 2 * handle_wall;
handle_outer_h = handle_open_h + 2 * handle_wall;
handle_x = outer_r - 2.5;
handle_z = (mug_h - handle_outer_h) / 2;
module d_shape(w, h) {
r = h / 2;
union() {
square([w - r, h], center = false);
translate([w - r, h / 2])
circle(r = r);
}
}
module mug_body() {
difference() {
cylinder(h = mug_h, r = outer_r);
translate([0, 0, bottom_t])
cylinder(h = mug_h - bottom_t + 0.1, r = inner_r);
}
}
module handle() {
translate([handle_x, 0, handle_z])
rotate([90, 0, 0])
linear_extrude(height = handle_depth, center = true, convexity = 10)
difference() {
d_shape(handle_outer_w, handle_outer_h);
translate([handle_wall, handle_wall])
d_shape(handle_open_w, handle_open_h);
}
}
union() {
mug_body();
handle();
} パラメータ (8) —
スライダを動かすと openscad-wasm で再レンダリング
prompt
OpenSCAD で、向きが指定されたマグカップを作ってください。 本体: - 外径 80mm、内径 70mm(肉厚 5mm)、高さ 90mm の円筒形マグ - 底面の厚みは 6mm - 内側は飲み物を入れられるよう中空 取手(handle): - マグの **+X 軸方向の側面のみ** に付ける(他の方向には付けない) - 取手は D 字形状(外側が半円、本体側が直線)で、本体外周にしっかり接続する - 取手の内側の空間は高さ 30mm × 幅 25mm(指 3 本ぐらい入る) - 取手はマグの高さ方向の中央付近に付ける - 本体と取手は確実に union され、マニフォールド(隙間や宙吊りなし)を保つ 完成したコード全体を ```openscad ... ``` のフェンスで囲んで出力してください。コードのみで、追加の説明は不要です。