—
tier-2-hex-bolt / gpt-5.3-codex
5 run / 累計 18.0s / 累計 $0.0163
openai gpt 5.3 codex bare
bare (provider default effort)
run detail → render
// M8 hex bolt (simplified, no threads)
// Units: mm
$fn = 64;
head_af = 13; // across flats
head_h = 5.3; // head height
shank_d = 8; // shank diameter
shank_l = 30; // shank length
head_r = head_af / sqrt(3); // circumradius for regular hex from across-flats
union() {
// Hex head: bottom face at z=0, extending +Z
cylinder(h = head_h, r = head_r, $fn = 6);
// Shank: from z=0 down to z=-30
translate([0, 0, -shank_l])
cylinder(h = shank_l, d = shank_d);
} パラメータ (4) —
スライダを動かすと openscad-wasm で再レンダリング
prompt
OpenSCAD で、規格に準じた M8 サイズの六角ボルトを作ってください。 ねじ山自体は省略してよく、円柱のシャンクで構いません。 寸法は以下に従ってください: - 頭部は六角柱で、対辺距離(across-flats)13mm、高さ 5.3mm - シャンク(軸部)は直径 8mm、長さ 30mm の円柱 - ボルト全体の中心軸は +Z 軸方向 - 頭部の底面が原点(z=0)に来るように配置し、シャンクは z<0 側へ伸ばす 完成したコード全体を ```openscad ... ``` のフェンスで囲んで出力してください。コードのみで、追加の説明は不要です。
variant: effort
SCAD (20 lines)
// M8 hex bolt (simplified, no threads)
// Units: mm
$fn = 64;
head_af = 13; // across flats
head_h = 5.3; // head height
shank_d = 8; // shank diameter
shank_l = 30; // shank length
head_r = head_af / sqrt(3); // circumradius for regular hex from across-flats
union() {
// Hex head: bottom face at z=0, extending +Z
cylinder(h = head_h, r = head_r, $fn = 6);
// Shank: from z=0 down to z=-30
translate([0, 0, -shank_l])
cylinder(h = shank_l, d = shank_d);
}—
—
—
iteration: iter-png
diff vs bare: +0/-0
// M8 hex bolt (simplified, no threads)
// Units: mm
$fn = 64;
head_af = 13; // across flats
head_h = 5.3; // head height
shank_d = 8; // shank diameter
shank_l = 30; // shank length
head_r = head_af / sqrt(3); // circumradius for regular hex from across-flats
union() {
// Hex head: bottom face at z=0, extending +Z
cylinder(h = head_h, r = head_r, $fn = 6);
// Shank: from z=0 down to z=-30
translate([0, 0, -shank_l])
cylinder(h = shank_l, d = shank_d);
}
SCAD (20 lines)
// M8 hex bolt (simplified, no threads)
// Units: mm
$fn = 64;
head_af = 13; // across flats
head_h = 5.3; // head height
shank_d = 8; // shank diameter
shank_l = 30; // shank length
head_r = head_af / sqrt(3); // circumradius for regular hex from across-flats
union() {
// Hex head: bottom face at z=0, extending +Z
cylinder(h = head_h, r = head_r, $fn = 6);
// Shank: from z=0 down to z=-30
translate([0, 0, -shank_l])
cylinder(h = shank_l, d = shank_d);
}
diff vs i1: +0/-0
// M8 hex bolt (simplified, no threads)
// Units: mm
$fn = 64;
head_af = 13; // across flats
head_h = 5.3; // head height
shank_d = 8; // shank diameter
shank_l = 30; // shank length
head_r = head_af / sqrt(3); // circumradius for regular hex from across-flats
union() {
// Hex head: bottom face at z=0, extending +Z
cylinder(h = head_h, r = head_r, $fn = 6);
// Shank: from z=0 down to z=-30
translate([0, 0, -shank_l])
cylinder(h = shank_l, d = shank_d);
}
SCAD (20 lines)
// M8 hex bolt (simplified, no threads)
// Units: mm
$fn = 64;
head_af = 13; // across flats
head_h = 5.3; // head height
shank_d = 8; // shank diameter
shank_l = 30; // shank length
head_r = head_af / sqrt(3); // circumradius for regular hex from across-flats
union() {
// Hex head: bottom face at z=0, extending +Z
cylinder(h = head_h, r = head_r, $fn = 6);
// Shank: from z=0 down to z=-30
translate([0, 0, -shank_l])
cylinder(h = shank_l, d = shank_d);
}
diff vs i2: +0/-0
// M8 hex bolt (simplified, no threads)
// Units: mm
$fn = 64;
head_af = 13; // across flats
head_h = 5.3; // head height
shank_d = 8; // shank diameter
shank_l = 30; // shank length
head_r = head_af / sqrt(3); // circumradius for regular hex from across-flats
union() {
// Hex head: bottom face at z=0, extending +Z
cylinder(h = head_h, r = head_r, $fn = 6);
// Shank: from z=0 down to z=-30
translate([0, 0, -shank_l])
cylinder(h = shank_l, d = shank_d);
}
SCAD (20 lines)
// M8 hex bolt (simplified, no threads)
// Units: mm
$fn = 64;
head_af = 13; // across flats
head_h = 5.3; // head height
shank_d = 8; // shank diameter
shank_l = 30; // shank length
head_r = head_af / sqrt(3); // circumradius for regular hex from across-flats
union() {
// Hex head: bottom face at z=0, extending +Z
cylinder(h = head_h, r = head_r, $fn = 6);
// Shank: from z=0 down to z=-30
translate([0, 0, -shank_l])
cylinder(h = shank_l, d = shank_d);
}