vibe-openscad

tier-2-hex-bolt / gpt-5.1-codex

5 run / 累計 29.2s / 累計 $0.0369

openai gpt 5.1 codex bare

bare (provider default effort)

run detail →
render
bare render of tier-2-hex-bolt
loading STL…
success 5.7s · 200/642t · $0.0073
SCAD (14 lines) 
$fn = 64;

module m8_bolt() {
    union() {
        // Head: hexagon, across-flats 13mm, height 5.3mm
        cylinder(h = 5.3, r = 6.5 / cos(30), $fn = 6);

        // Shank: cylinder, diameter 8mm, length 30mm extending in -Z
        translate([0, 0, -30])
            cylinder(h = 30, r = 4);
    }
}

m8_bolt();

prompt

OpenSCAD で、規格に準じた M8 サイズの六角ボルトを作ってください。
ねじ山自体は省略してよく、円柱のシャンクで構いません。

寸法は以下に従ってください:
- 頭部は六角柱で、対辺距離(across-flats)13mm、高さ 5.3mm
- シャンク(軸部)は直径 8mm、長さ 30mm の円柱
- ボルト全体の中心軸は +Z 軸方向
- 頭部の底面が原点(z=0)に来るように配置し、シャンクは z<0 側へ伸ばす

完成したコード全体を ```openscad ... ``` のフェンスで囲んで出力してください。コードのみで、追加の説明は不要です。

variant: effort

lownot run
—
medium (default) success →
medium
5.7s · 200/642t · $0.0073
SCAD (14 lines) 
$fn = 64;

module m8_bolt() {
    union() {
        // Head: hexagon, across-flats 13mm, height 5.3mm
        cylinder(h = 5.3, r = 6.5 / cos(30), $fn = 6);

        // Shank: cylinder, diameter 8mm, length 30mm extending in -Z
        translate([0, 0, -30])
            cylinder(h = 30, r = 4);
    }
}

m8_bolt();
highnot run
—
maxnot run
—
xhighnot run
—

iteration: iter-png

i1 success →
iter 1
6.1s · 1049/600t · $0.0081
diff vs bare: +0/-0 
  $fn = 64;
  
  module m8_bolt() {
      union() {
          // Head: hexagon, across-flats 13mm, height 5.3mm
          cylinder(h = 5.3, r = 6.5 / cos(30), $fn = 6);
  
          // Shank: cylinder, diameter 8mm, length 30mm extending in -Z
          translate([0, 0, -30])
              cylinder(h = 30, r = 4);
      }
  }
  
  m8_bolt();
SCAD (14 lines) 
$fn = 64;

module m8_bolt() {
    union() {
        // Head: hexagon, across-flats 13mm, height 5.3mm
        cylinder(h = 5.3, r = 6.5 / cos(30), $fn = 6);

        // Shank: cylinder, diameter 8mm, length 30mm extending in -Z
        translate([0, 0, -30])
            cylinder(h = 30, r = 4);
    }
}

m8_bolt();
i2 success →
iter 2
6.4s · 1049/664t · $0.0088
diff vs i1: +0/-0 
  $fn = 64;
  
  module m8_bolt() {
      union() {
          // Head: hexagon, across-flats 13mm, height 5.3mm
          cylinder(h = 5.3, r = 6.5 / cos(30), $fn = 6);
  
          // Shank: cylinder, diameter 8mm, length 30mm extending in -Z
          translate([0, 0, -30])
              cylinder(h = 30, r = 4);
      }
  }
  
  m8_bolt();
SCAD (14 lines) 
$fn = 64;

module m8_bolt() {
    union() {
        // Head: hexagon, across-flats 13mm, height 5.3mm
        cylinder(h = 5.3, r = 6.5 / cos(30), $fn = 6);

        // Shank: cylinder, diameter 8mm, length 30mm extending in -Z
        translate([0, 0, -30])
            cylinder(h = 30, r = 4);
    }
}

m8_bolt();
i3 success →
iter 3
5.4s · 1049/352t · $0.0053
diff vs i2: +0/-0 
  $fn = 64;
  
  module m8_bolt() {
      union() {
          // Head: hexagon, across-flats 13mm, height 5.3mm
          cylinder(h = 5.3, r = 6.5 / cos(30), $fn = 6);
  
          // Shank: cylinder, diameter 8mm, length 30mm extending in -Z
          translate([0, 0, -30])
              cylinder(h = 30, r = 4);
      }
  }
  
  m8_bolt();
SCAD (14 lines) 
$fn = 64;

module m8_bolt() {
    union() {
        // Head: hexagon, across-flats 13mm, height 5.3mm
        cylinder(h = 5.3, r = 6.5 / cos(30), $fn = 6);

        // Shank: cylinder, diameter 8mm, length 30mm extending in -Z
        translate([0, 0, -30])
            cylinder(h = 30, r = 4);
    }
}

m8_bolt();