tier-4-gp2y0a21yk / gpt-6-sol
1 run / 累計 41.4s / 累計 $0.0327
openai gpt 6 sol pdf-page
bare (provider default effort)
run detail → render
// Sharp GP2Y0A21YK0F 測距センサの外形モデル
// 単位: mm
// 原点: 本体の中心
// +Z: 光学窓側、-Z: PWB・コネクタ側
//
// データシートに示された外形、取付穴間隔、光学中心間隔を基準にした
// 外観モデル。細部の段差やコネクタ内部は概略形状。
$fn = 72;
body_w = 29.5;
body_h = 13.5;
body_back = -4.2;
body_front = 4.2;
hole_pitch = 37;
hole_d = 3.2;
ear_r = 3.75;
ear_thickness = 1.2;
emitter_x = -10.25;
detector_x = 9.75; // 光学中心間隔 20 mm
case_color = [0.105, 0.105, 0.11];
trim_color = [0.19, 0.19, 0.20];
lens_color = [0.10, 0.14, 0.17];
metal_color = [0.72, 0.72, 0.69];
module rounded_rect(w, h, r) {
offset(r = r)
square([w - 2*r, h - 2*r], center = true);
}
module rounded_box(w, h, z0, depth, r = 0.35) {
translate([0, 0, z0])
linear_extrude(height = depth)
rounded_rect(w, h, r);
}
module mounting_ears() {
color(case_color)
difference() {
union() {
for (side = [-1, 1]) {
translate([0, 0, body_back])
linear_extrude(height = ear_thickness)
hull() {
translate([side * 14.1, 0])
square([1.3, 7.5], center = true);
translate([side * hole_pitch/2, 0])
circle(r = ear_r);
}
}
}
for (side = [-1, 1])
translate([side * hole_pitch/2, 0, body_back - 0.1])
cylinder(h = ear_thickness + 0.2, d = hole_d);
}
}
module main_case() {
color(case_color)
difference() {
rounded_box(body_w, body_h,
body_back, body_front - body_back, 0.35);
// 光学部の浅い窪み
translate([emitter_x, 0, body_front - 0.65])
cylinder(h = 0.8, d = 6.9);
translate([detector_x, 0, body_front - 0.65])
cylinder(h = 0.8, d = 7.2);
}
// 正面、光学窓周囲の矩形フレーム
color(trim_color) {
translate([emitter_x, 0, body_front])
linear_extrude(height = 0.35)
difference() {
square([7.7, 7.5], center = true);
circle(d = 6.45);
}
translate([9.25, 0, body_front])
linear_extrude(height = 0.35)
difference() {
square([16.3, 7.5], center = true);
translate([0.5, 0])
circle(d = 6.9);
}
}
// 窓の奥に見えるレンズ
color(lens_color) {
translate([emitter_x, 0, body_front - 0.54])
cylinder(h = 0.17, d = 5.7);
translate([detector_x, 0, body_front - 0.54])
cylinder(h = 0.17, d = 6.1);
}
}
module connector() {
// 本体の下寄りにある、-Z 向きの3極コネクタ
connector_y = -9.65;
connector_rear = -8.4;
color(case_color)
difference() {
translate([0, connector_y, connector_rear])
linear_extrude(height = 4.2)
rounded_rect(10.1, 6.0, 0.35);
// 挿入口
translate([-4.12, connector_y - 2.36, connector_rear - 0.1])
cube([8.24, 4.72, 2.55]);
}
// 挿入口内の絶縁体
color(trim_color)
translate([0, connector_y, -6.05])
cube([7.65, 4.15, 0.65], center = true);
// 3極の接点
color(metal_color)
for (x = [-2, 0, 2])
translate([x, connector_y, -7.12])
cube([0.55, 2.65, 0.25], center = true);
}
module sensor() {
mounting_ears();
main_case();
connector();
}
sensor(); パラメータ (10) —
スライダを動かすと openscad-wasm で再レンダリング
prompt
添付画像は Sharp 製測距センサ GP2Y0A21YK0F のデータシートのページです。 OpenSCAD でモデリングしてください。 座標系: 単位 mm、本体の中心を原点とし、取付面(PWB / コネクタ側)を -Z に向ける。 完成したコード全体を ```openscad ... ``` のフェンスで囲んで出力してください。